OEM names are used for descriptive purposes only. Turf Pride claims no association with these companies.
Part # TP-14402-U OEM Part # ET14402 John Deere Standard 1/8” Cut / Ultra Quality Bedknife.
Turf Pride Premium Bed Knives.
Turf Pride Bed Knives are available in three thicknesses and are available to fit major brand greens mowers.
Hardness: Rockwell C scale 48 – 49
Material: Spring type steel high carbon content, with chrome/nickel alloys. Polish finish.
Effective Cutting Heights:
Turf Pride (thin bed knife) 0.100
Turf Pride (super thin bed knife) 0.075
Turf Pride (tournament bed knife) 0.050
Straightness: In order to achieve maximum cutting performance, a bed knife must be perfectly straight. Even the slightest bow will result in less than desired performance. A bed knife with a “smile” shape will cut on each end and not along the middle. On the other hand, a bed knife with a “frown” will cut along the middle and not on each end. Turf Pride bed knives are guaranteed to be perfectly straight without the need of grinding after attaching.
Thickness: With the Turf Pride premium knives, the over all thickness from one end to the other is guaranteed not to vary more than .001”. In low cut settings even the slightness difference in thickness will result in a deviation in cutting heights and will be more amplified the lower the cut. Turf Pride Premium bed knives will ensure a true golf ball roll on all putting surfaces.
Hardness: Consistency of hardness is crucial in order to maintain an even and straight wear pattern. This again is critical when mowing at lower heights.
Updated December, 2012.
We are now making a 30 – 40 degree Manufactured Relief standard on all of our bedknives.
No need to spend time grinding relief, saving dollars.
Set grinding stone at 2 to 3 degrees negative.
Then make 2 or 3 passes to establish the "land area" and you're done.
Makes mid-season touch up a breeze.
Manufactured Relief is exclusive to TurfPride.
Payment can be made over the phone via Visa, MasterCard, American Express or Discover by calling 239-357-1853 Craig.
- Brand Turf Pride
- Mfg Part # TP-14402-U
A Return Goods Authorization (RGA) number must be obtained from customer service (1-239-357-1853). Products must be unused and in their original cartons. No discontinued or obsolete items will be accepted. For safety reasons, no returns can be accepted on HEPA items. Customer pays return freight charges and 15% restocking fee, except when return is due to freight damage. We reserves the right to refuse any return not in compliance with the above.