Happymodel Mobula7 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone w/ 700TVL Camera BNF

Other
Add to Cart
  • Description
  • Payments, Shipping & Policies
  • Contact seller
Happymodel Mobula7 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone w/ Upgrade BB2 ESC 700TVL BNF - Basic Version Compatible Frsky Non-EU Receiver

PreOrder Processing time:Expected on November 25, 2018

Happymodel Mobula7 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone w/ 700TVL Camera BNF

Specification:
Brand Name: Happymodel
Model: Mobula7
Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm
Version: Basic Version / Standard Version ( Optional)
- The diffirence of them are the package charger.
Basic Version: USB Charger
Standard Version: 6-way Charger
Receiver ( Optional): Compatible Frsky NON-EU Receiver
Compatible Frsky EU-LBT Receiver ( XM+ Receiver)
Compatible Flysky AFHDS/ AFHDS-2A Receiver
Compatible DSM2/DSMX Receiver
Size: 98mm*98mm*36mm
Weight: 25.9g (without battery)

Crazybee F3 Pro Flight Controller Item Name: Crazybee F3 Pro FC
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 3.5-8.7V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Diffirent version having diffirent receiver)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready

Firmware
(Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
(Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
(DSM2/DSMX version) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX
(Frsky EU-LBT version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS

Onboard 5A 4 In 1 ESC
Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
MCU upgraded to EFM8BB21
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7
Default protocol: DSHOT600

Onboard Frsky NON-EU receiver Version
SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Onboard Frsky EU-LBT Version
(External XM+ receiver)

Operating Voltage Range: 3.7~10V
Operating Current: 30mA @5V
Operating Range: Full range
With RSSI output on board: Analog 0~3.3V
Firmware Upgradeable, Default firmware EU-LBT with RSSI

Onboard Flysky receiver Version
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m


Onboard DSM2 / DSMX receiver version
Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m

SE0802 16000KV Motor
Model: SE0802
KV: 16000KV
Configu-ration: 9N12P
Stator Diamter: 8mm
Stator Length: 2mm
Shaft Diameter: Φ1.0
Motor Dimension (Dia.*Len) : Φ10.5*14.5mm
Weight: 1.8g
Support 1-2S Lipo

No.of Cells: 1S Lipo
Propeller
40mm 4-blade Propeller ( 4 CW + 4 CCW)


5.8G VTX AIO Camera

5.8G 40CH 25mW VTX
Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)

700TVL FOV120 Camera
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready(Frsky EU-LBT and DSMX version not compatible)
Size: 13.9"12.0mm ( L*W )
Weight: 3g

Lipo Battery
Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 55mmx12mmx7mm
Weight: 6.5g
Connector: PH2.0
Notes: Need 2pcs batteries for Series circuit

Features:
- New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
- 2S whoop more powerful and more flight time
- Betaflight support , multi flight mode: ACRO/AIR/ANGLE
- New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
- Smartaudio ready , change VTX bands, channels via OSD
DSM2/DSMX and Frsky EU-LBT version are Serial-based receiver, so Smartaudio is not compatible.
- Adjust the settings and the PID of the flight controller via OSD
- Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
- Flysky version support both AFHDS and AFHDS-2A protocol transmitter
- DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
- Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
- Full telemetry function ready
- Head lights ready
- Camera angle adjustable
- Real Bind and Fly version
- Buzzer Ready

Package Included:
Basic Version
1x Mobula7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x USB Lipo/LIHV Charger
1x Fixing Mount for Lipo Battery
1x Propeller Disassemble Tool
1x Screwdriver

Standard Version
1x Mobula7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x 1S06 6 Way Lipo/LIHV charger
1x Propeller Disassemble Tool
1x Fixing Mount for Lipo Battery
1x Screwdriver
(BG)
    00125
    Payment Methods
    Shipping UPS, FREE Shipping
    Payment Policy

    Privacy Notice
    This privacy notice discloses the privacy practices for RDJ Life. This privacy notice applies solely to information collected by this website. It will notify you of the following:



    What personally identifiable information is collected from you through the website, how it is used and with whom it may be shared.
    What choices are available to you regarding the use of your data.
    The security procedures in place to protect the misuse of your information.
    How you can correct any inaccuracies in the information


    Information Collection, Use, and Sharing
    We are the sole owners of the information collected on this site. We only have access to/collect information that you voluntarily give us via email or other direct contact from you. We will not sell or rent this information to anyone.

    We will use your information to respond to you, regarding the reason you contacted us. We will not share your information with any third party outside of our organization, other than as necessary to fulfill your request, e.g. to ship an order.

    Unless you ask us not to, we may contact you via email in the future to tell you about specials, new products or services, or changes to this privacy policy.



    Your Access to and Control Over Information
    You may opt out of any future contacts from us at any time. You can do the following at any time by contacting us via the email address or phone number given on our website:

    See what data we have about you, if any.
    Change/correct any data we have about you.
    Have us delete any data we have about you.
    Express any concern you have about our use of your data.


    Security
    We take precautions to protect your information. When you submit sensitive information via the website, your information is protected both online and offline.

    Wherever we collect sensitive information (such as credit card data), that information is encrypted and transmitted to us in a secure way. You can verify this by looking for a lock icon in the address bar and looking for "https" at the beginning of the address of the Web page.

    While we use encryption to protect sensitive information transmitted online, we also protect your information offline. Only employees who need the information to perform a specific job (for example, billing or customer service) are granted access to personally identifiable information. The computers/servers in which we store personally identifiable information are kept in a secure environment.

    Shipping Policy

    Shipping:


    Most orders will be shipped within 24-48 hrs. of receipt, although it may take up to 4 business days to ship some orders, depending on factors such as how busy the warehouse is at any given time, etc. NOTE: We begin processing orders at 6am Eastern time Monday-Friday. Orders received after 6am Eastern time will not begin processing until the following business day. For example, if we receive your order at 9:30am Eastern time on Tuesday, it will begin processing Wednesday at 6am. The 24-48 hour processing time begins when an order enters processing, not when it is actually placed.

    As we ship large quantities of merchandise daily, occasionally an item you order may have run out. As our stock is replenished daily, any item that is not on hand usually will be back in stock within 1-4 days. In this situation you may experience a brief delay in shipping your order, but all orders generally ship within 4 business days (Saturday and Sunday excluded). In the event that we cannot fulfill your order within that time, we will notify you.

    Every order is equally important to us, and we ship every order out just as quickly as we can. However, if you must have your merchandise by a certain date, we suggest you place the order early enough to avoid disappointment if your merchandise does not arrive on time. We do not accept returns of shipments because they did not arrive by a certain date.

    Return/Exchange Policy

    Refund, Returns, and Cancellation Policies:

    Items purchased from us may be returned within 30 days of receipt for refund or store credit. Please note the following policies related to returns:

    -To be eligible for return, items must be in the same condition they were received in, with all boxes, components, instructions, parts, etc. included. Also, no price stickers, etc. can be affixed to the items. Items returned not meeting this criteria will be returned to the sender or disposed of.

    -All returns must be accompanied by a return authorization number. Please call or email us for a RMA number BEFORE sending your return. Returns not accompanied by RMA number will be refused.

    -Returned items are subject to a 15% restocking fee.

    -Items purchased more than 30 days ago are not eligible for return. Many items we sell come with a manufacturer's warranty. After 30 days, please contact the manufacturer directly for warranty service.



    -Shipping charges for return shipments are at the customer's expense.



    For information on items damaged in transit, please see "Shipping Information" section for procedure to follow.

    In the case of defective items or wrong items shipped, etc., any merchandise returned to us must be accompanied by a return authorization number. This number will be furnished to you at the time the return is authorized, and must be on the address label or prominently marked on the box. ANY MERCHANDISE RETURNED TO US WITHOUT A RMA# WILL BE REFUSED AND RETURNED TO THE SHIPPER AT THEIR EXPENSE. Please note that defective items returned to us will be exchanged for another of the exact same item. We are unable to exchange defective items for different items, unless the item returned is no longer available.

    Other Policies

    c93bfc56ac

    OUR CONTACT INFORMATION:

    BY TELEPHONE 417-712-1128

    Office hours are 8:00am-5:00pm Central Time, Monday-Friday

    BY EMAIL:
    Emails are answered within 24 hours. Emails submitted after business hours will be answered the next day.

    MAILING ADDRESS:

    RDJ Life
    RR 1 2335
    Dora MO 65637

    Please Login or Register first before asking a question.
    More from RDJProducts's Store

    Cast Iron Number Fou...
    $12.00

    Blackview BV6800 Pro...
    $300.00

    Q7 Dual-Speaker Cell...
    $62.00

    Fontanini Limited Ed...
    $39.00

    Friendship Beaded Br...
    $22.00

    Thomas Kinkade Jimmy...
    $42.00

    1-to-3 Dual USB Port...
    $32.00

    Horseshoe Drawer Pul...
    $29.00

    6-Key 3200dpi LED US...
    $16.00

    Green Candy Jar Grap...
    $43.00

    Anti-Glare Dazzling ...
    $21.00

    2pcs 1.5inch 4Ohm 3W...
    $28.00