MKS-GEN L V1.0 Integrated Controller Mainboard + 2.8 Inch MKS-TFT28 For 3D Printer
: Please let us know which option you want to receive via the message on checkout step (if there are multi options)
Aiming at the problems exist on the open sourced controller board such as Ramps 1.4, the developers in Makerbase specially optimize and develop a new product, MKS-Gen L, which provides more flexible choices for users.
1. 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors.
2. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like.
3. Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors.
4. Use high-quality MOSFET, better cooling and more stable.
5. Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage.
6. Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing.
7. Use CH340 serial port chip, more easily install the drive than 16U2.
8. Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4.
9. Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.
10. Available to input 24V, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.
11. X axis, Y axis and Z axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.
12. Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.
MKS-TFT28 Touch Screen
- 2.8-inch color touchscreen, support U disk, and SD card.
- Reserve WIFI interface, support WIFI function by adding WIFI module.
- Three themes, two styles, provide the users with more choices.
- Allowed to self-design the interface of booting logo and all buttons.
- Allowed to add at most 13 customized function buttons.
- Update the configuration and firmware by SD card, easily operate.
- Support Marlin, Repetier and Smoothieware firmware, and donât need to modify the master program.
- Allowed to work with Ramps 1.4(TFT28) as well as controller board developed by Maker base.
- Support âprint from breakpointâ function,âprint from power outageâ and âfilament detectâ function.
- Support âauto off after printing finishesâ function with âauto off after printing finishesâ module.
1x MKS-Gen L V1.0 board
1x MKS-TFT28 touch screen
1x USB cable
1x FC flat cable
System connection diagram:
Installation Dimensional Drawing:
PIN port map:
- Brand TechDaddy
- Mfg Part # TDBG1311394
We will arrange shipping for you within 3 days after payment cleared except the holidays.
- Estimated delivery time from date of shipment is 12-21 working days from our warehouse in China, over 80% of our customers receive the products within 20 working days (please note that these are estimates; post office and customs delays can occur, if so, please check the information at your local post office, if you still can not get the package, please contact us.
-We ship items to Worldwide.
We accept return in 30 days
If you send email to us, In our working hours will be resumed within 24 hours.
If you we are not satisfied with the product or service, please contact me and don't give us negative or natural feedback. We must give you a satisfactory solution. Thank you!