CNC Shield + UNO R3 Board + 4 X DRV8825 Driver Kit For Arduino 3D Printer

Electronics > 3D Printer & Supplies
Add to Cart
  • Description
  • Payments, Shipping & Policies
  • Contact seller

CNC Shield + UNO R3 Board + 4 X DRV8825 Driver Kit For Arduino 3D Printer


Available options:
**NOTE: Please let us know which option you want to receive via the message on checkout step (if there are multi options)

- CNC Shield Board

Version: 3.0
Color: Red
Size(L*W*H): 68 x 53 x 18 mm
Voltage: DC 12~36 V

Features:
1. Uses removable A4988 or DRV8825 compatible stepper drivers.
2. The extension board can be used for carving machine, 3 d printer driver expansion board
3. GRBL 0.8 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
4. PWM Spindle and direction pins,4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
5. Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
6. Please note that this is an unassembled kit and Basic soldering skills are needed.


- DRV8825 Stepper Motor Driver

The module has an interface pinout is almost the same with A4988 stepper motor drive carrier, so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications.
DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step).
It uses 8.2 - 45V, can provide up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient additional cooling).


Features:
Simple step and direction control interface
The interface can connect directly with 3.3V and 5V systems
Support over-temperature thermal shutdown, over-current shutdown and under-voltage lockout
Support short-to-ground and shorted-load protection
Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
4-layer, 2 oz copper PCB for improved heat dissipation
Adjustable current control support you to set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
45V maximum supply voltage
Built-in regulator (needed external logic voltage supply)


- Uno R3 Board

MCU: ATmega328
Clock speed: 16 MHz
USB interface: ATmega16U2
Operating voltage: 5 V
I-I / O pin output current: 40 mA max
3.3 V output current: 150 mA max
Digital I/O pins: 14 (including 6 with PWM capability)
Analog input pins: 6
EEPROM: 1 kB
Static RAM (SRAM): 2 kB
Flash memory: 32 kB
Size(L*W*H): 68 x 53 x 10 mm




Package included:

1 x Uno R3 Board
1 x CNC Shield Board
4 x DRV8825 Stepper Motor Driver
4 x Heat Sink
1 x USB Cable
1 x 40-Pin Row Needles












    • Brand TechDaddy
    • Mfg Part # TDBG1134845
Payment Methods
Shipping USPS, $1.99
Shipping Policy

We will arrange shipping for you within 3 days after payment cleared except the holidays.
- Estimated delivery time from date of shipment is 12-21 working days from our warehouse in China, over 80% of our customers receive the products within 20 working days (please note that these are estimates; post office and customs delays can occur, if so, please check the information at your local post office, if you still can not get the package, please contact us.
-We ship items to Worldwide.

Return/Exchange Policy

We accept return in 30 days

Other Policies

CONTACT US

If you send email to us, In our working hours will be resumed within 24 hours.
If you we are not satisfied with the product or service, please contact me and don't give us negative or natural feedback. We must give you a satisfactory solution. Thank you!

Please Login or Register first before asking a question.
More from TechDaddy's Store

3PCS M6X30 1.75mm Th...
$5.75

TEVO MKS-TFT28 V1.3 ...
$59.80

RepRap GT2 20T 5mm B...
$6.41

TMC2130 V1.1 Stepsti...
$12.85

8Pcs GT2 Pulley 20Te...
$15.28

Lerdge Touch Screen ...
$2.92

3Pcs 0.6mm Titanium ...
$6.74

MK8 Extruder 0.4mm F...
$42.59

220*220mm Black Squa...
$5.03

3Pcs 3D Printer 3.0m...
$6.84

3D Printer Upgrade M...
$105.99

V6 Metal Short-Range...
$8.98