The GreensSlicer- A Gentle Approach to Aeration...
$3,839 TS-48 GreensSlicer TS-48/ 48” Wide.
$4,510 TS-48SS GreensSlicer TS-48/ 48” Wide; Stainless Steel Tines.
You Tube Video: https://youtu.be/HPCwLPWxDLg
Imagine if you had the ability to spike or aerate without all of the complex machinery, doing it with efficiency AND performance. The GreensSlicer® is the answer, making it a perfect addition to your equipment stable, without killing your budget.
As an affordable alternative to motorized methods, the GreensSlicer is a ground-driven, well-engineered performer. With reliability and longevity at its soul, the GreensSlicer is designed and tested for use on greens, tees, and fairways for over-seeding, opening localized dry spots, and aeration.
The GreensSlicer is simply one of the smartest solutions to turf maintenance. As a straight, tow-behind unit, the GreensSlicer avoids all of the mechanical problems associated with hydraulics and engine operations. By keeping with the GreensGroomer WorldWide mission of lower total cost of ownership, the GreensSlicer delivers on all counts.
No Power Source Required.
Why struggle with complex machinery or hydraulics? The GreensSlicer doesn't require any on-board power to operate. The tow-behind unit uses the power of gravity in the form of water tanks as ballast.
The GreensSlicer® by GreensGroomer provides a quick and easy approach to over-seeding, opening dry spots, and aeration on greens, tees, and fairways. The GreensSlicer is made up of two rows of tines, offset front to back to create 2” spacing. Two 25 gallon water tanks present infinite adjustment of addition weight. Simply adjust the gallons in each tank to create the desired depth of the tines.
GreensSlicer (TS-48) Specifications:
All measurements listed within the specifications are from the original design documents. Please confirm the accuracy of such measurements for your own benefit.
Main Frame: 2 inch square tube w/ steel wire protection cages.
Draw Bar: One piece 2” square tube.
Length: 43 inches (89 inches overall including the draw-bar)
Width: 55 inches.
Weight: 430 lbs.
Running Gear: 2 pneumatic tires (16 x 650-8) Ribbed 2-ply with Oil Impregnated Graf oil bushings.
Electric Lift: 1000 lb. capacity Electric 12 volt linear actuator.
Finish: Powder coat with 6-step pre-wash including de-greaser and anti-rust coating.
Electric Lift: 2000 lb. capacity Electric 12 volt linear actuator.
Shipping Crate: 58” x 42” x 38”
Crated Weight: 730 lbs.
Did You Know?
Upon first look, one might think the unit is some sort of spraying device due to the tanks. But the tanks are the prime engineering solution — ballast or weight that controls the depth of cut. More water in tank yields a deeper cut. Simple, yet completely effective.
Located under the large ballast tanks are the two 48" wide tine shafts that house 25 star tines. The tines on each shaft are offset to create a 2" spacing.
For easier operation and transport, the running gear is mounted on an electrically actuated axle assembly. This assembly pivots up during use and pivot down for transport mode.
Payment can be made over the phone via Visa, MasterCard, American Express or Discover by calling 239-357-1853 Craig.
- Brand Greens Slicer
- Mfg Part # TS-48