Wet Dry Heavy Duty Central Vacuum Aqua Air AA003 - Model 150

Add to Cart
  • Description
  • Payments, Shipping & Policies
  • Contact seller
Free Shipping. 239-357-1853 Craig

We can figure out everything you will need for your job if you give us your specs.

AQUA-AIR Wet/Dry Central Vacuum Power Units.

Aqua Air AA003 - Model 150 Heavy Duty Central Vacuum Unit & Wet Extractor

•Single Canister (14" x 47")
•7.2" Extractor Motor 3 stage, epoxy coated sealed bearings
•145" Water Lift
•102 CFM
•14 amp
•120 volts
•Ideal for homes and light commercial up to 5,000 square feet.

UNIT: One piece made of rustproof, color proof, shock proof, fire retardant, A.B.S. Lustran, 35 cm x 120 cm (14" x 47")

VACUUM MOTORS: Amtek-Lamb 14 Amp., Commercial Extractor model 117-500-13. 3 stage, 7.2" dia.

FACTORY RATING: 145" water lift, 102 CFM

RECOVERY TANK: The cyclonic separator and cold water spray separate the water, foam and debris from the air flow without restrictive filters or mechanical floats. Large debris is contained in a mesh screen while the liquids automatically dump down the drain.

ELECTRICAL: 120 volt, 60 hertz, 15 amp standard plug

WATER: Cold water with shut-off. Hot water (up to 170°F [77°C]) with shut-off. Connect directly to water outlets or to optional cleaning solution injector (AA031 or AA033).

DRAIN: 2" DWV drain to sewer. A p-trap will be required and vent to meet plumbing codes.

EXHAUST: If power unit is located in a small room, exhaust air from the vacuum motor must be exhausted to the outside of the building using the most direct route possible.

POWER UNIT: Locate in an area where it will be protected from freezing. The mounting bracket should be firmly attached to a wall stud or masonry wall. A minimum space of 12" is required from the ceiling and on each side of the unit. The unit must be mounted high enough above the floor as to allow for drain connection and easy access to service the debris screen.

Vacuum inlets are conveniently located near doorways, in hallways or other centrally located areas. The vacuum lines are regular 2" PVC vacuum tubing and fittings.

WATER OUTLETS: Water Outlets are located next to the vacuum inlets. (In existing structures where access is limited the outlets may be located under sinks or on other wall where access is possible. The water lines may be either 3/8" or 1/2" PEX, 3/8" copper or other equivalent tubing appropriate for the building with connections made in accessible areas.

COMMERCIAL LIMITED WARRANTY: The manufacturer warrants to the initial purchaser that the AQUA-AIR Wet/Dry° power unit and cleaning solution injector will be free from defects in material and workmanship for one (1) year from the date of the first consumer purchase or one thousand (1000) hours whichever occur first, and that hoses, tools and other attachments will be free from defects in material and workmanship for ninety (90) days from the date of the first purchase.

Aqua Air YouTube Videos.





Designed and assembled in the USA.

For shipping to Alaska, Hawaii and Canada call for pricing.
    • Brand Aqua Air
    • Mfg Part # AA003
Payment Methods
Shipping UPS, FREE Shipping
Return/Exchange Policy

Return Policy.

A Return Goods Authorization (RGA) number must be obtained from customer service (1-239-357-1853). Products must be unused and in their original cartons. No discontinued or obsolete items will be accepted. For safety reasons, no returns can be accepted on HEPA items. Customer pays return freight charges and 20% restocking fee, We reserves the right to refuse any return not in compliance with the above.

Please Login or Register first before asking a question.
More from ContractorsStore's Store

Hair Salon Wet Dry C...

Aqua Air AA001 Wet D...

Aqua-Air Portable We...

Auto Detailing Wet D...

Hair Salon Wet Dry C...

Auto Detailing Porta...

Central Vacuum Syste...

Auto Shop Wet Dry Ce...

Food Service Wet Dry...

Hotel Wet Dry Centra...

Auto Detailing Wet D...

Car Wash Central Vac...