ATR Tile Leveling Alignment System DIY KIT (Grout spacer 3mm)

For a lippage free surface

Great tool for Floors and Walls

Buy Now at http://www.a2zsell.com

Kit Include: 100 Cross Spacers 100 Edge Spacers 100 (Re-Usable) Pre-Assemble Spindle, 10mm socket (1 per customer)

About 250 sq ft coverage area

Grout spacer (3mm) - Tile thickness (1/4 - 3/4) (6mm-20mm) 15/64 - 51/64

Only 1 cross spacing plate for 4 tiles NOT 4 clips like every other Leveling System

While every other system require 376 units for 100 pieces of tile ATR require only 117

Example of the different between ATR to other leveling system - 100 pieces of tile project ATR use total of 117 spacers with approximately cost of $29.99 compared to any other leveling system 376 spacers with cost of $44.00 = About 33% saving in money for spacers and over 66% time saving in Labor .

Advantages of the ATR Tile Leveling

• Simple and quick to lay with only 2 elements: Spacer & Spindale. 
• The only system that removed without the use of a force 
• Only System that leave clean grout line (no risk of spacers not break all the way) 
• Cross Spacers (+) Shape allow for 2/3 of saving Keeps tiles in place while drying 
• All-in-one grout spacing and tile alignment system 
• Professional finishes every time 
• Very simple and easy to use 
• Saves time 
• Suitable for indoor and outdoor uses 
• Re-usable spindle Australian design and 
• Australian made How to use 

ATR Tile Leveling System

3 Easy steps
1. Spread thinset install tile
2. Screw spindle into spacing plate, Slide spindle with spacing plate attached in between two tiles.
3. Tighten spindle clock wise firmly until all four corners are aligned flush.
* Remove Re-usable spindle once tile adhesive is dry.